Hello! We have finished a cool Nextion project. It is very easy to create. Download the project file here: Nextion Music Player HMI Project File Download related codes of this project from this website: Nextion Music Player Project Source Codes Below is the demonstration video(Note: this is only a demonstration project, the progress bars are not set
Our Nextion Editor has updated to the latest V0.30. A lot of new functions have added. You may also noticed that two new components has been added: number and dual-state button. So how to use these two component? Here I would like to show you an example. In this example, I will use various components
This post I`m going to teach you to build a gradient progress bar project. Gradient progress bar has been widely applied to many places like refresh page, buffer zone. For HMI designing, I think it is a very important and practical project. Download the HMI project file from here. I`m going to build a project containing
Keypad is widely applied to all kinds of projects. This post I will show you a Nextion keypad project. Download the HMI project File: Nextion-Keypad-Project As you can watch the project demonstration video as below:
Recently many customers ask us how to apply Nextion solution to building automation. For such a project, in order to save construction time and costs, usually the prioritized power supply for terminal equipment will be by POE (power over Ethernet). But Nextion use only one serial to connect, it neither supports Ethernet, nor supports POE.
Many customers use the Nextion display in their own business projects. They may need to upload the Nextion firmware through their own MCU. Here we disclose the upload protocol and release the Arduino upload library. Users need to know nothing about the protocol if they only upload firmware through Nextion Editor. Step 1. Find your serial