As of Nextion Editor v1.65.0, the Nextion 10 bytes of power on preamble Nextion Startup 00 00 00 FF FF FF (NIS 7.19) and Nextion Ready 88 FF FF FF (NIS 7.29) have been moved from firmware into Program.s as a printh statement printh 00 00 00 FF FF FF 88 FF FF FF. This
Please note: Due to the pandemic, second source flash ICs may be used in your Nextion device. Where such is the case, a card noting that the need to use Editor version 1.63.3 or higher is required. These devices have a QR code on the microSD card slot of the Nextion so it can be
Create a new HMI project: - in the Page Preinitialize Event add the code touch_j Compile, upload and run your project. Follow the on-screen instructions.
It is pretty straight forward - there is no recovery. It becomes locked to protect the project DO NOT LOSE YOUR PASSWORD, or do not use password.
Select Import page to open dialog, select *. page file, click "Open"
The latest version of Nextion Editor can be downloaded [here] To maintain code compatibility with projects created with version 0.53 or prior, an LTS Edition (Long Term Support) of the Nextion Editor can be downloaded [here]. The LTS Edition is not an excuse to be fearful of creating a new HMI project in the newer