10 10, 2017

Using the Nextion microSD (upload)

By |2022-09-20T23:42:40+08:00October 10th, 2017|Categories: , , , |0 Comments

Nextion's microSD slot is primarily used to upload a TFT project file. - The Intelligent Series has added capabilities, see Forum Announcements Not all microSD cards are made for use with embedded devices. - especially newer microSD cards made for cameras, etc. Class 10 HC 8GB to 32GB cards have had good success. Others too.

10 10, 2017

Standard, Enhanced and Community Support

By |2020-01-04T00:25:03+08:00October 10th, 2017|Categories: |0 Comments

Standard Support (Level 2) is offered to Itead customers. - you must deal your Seller as per Buyer-Seller protection laws - we only ensure the hardware itself works as expected - please understand that we can not debug your code. Supported is stated on the Standard Support page. Enhanced Support is available by purchasing Tickets

10 10, 2017

Connecting Nextion to a Control Device

By |2021-03-13T08:16:26+08:00October 10th, 2017|Categories: , , |0 Comments

Nextion is a 5V TTL Serial HMI device, be mindful to ensure connecting to an appropriate adapter The connection between Nextion and control device Nextion Display -------- Control Device 5V (Red) ------------------------- 5V GND (Black) ----------------------- GND TX (Blue) ------------------------ RX RX (Yellow)----------------------- TX Ensure Ground with all used devices is common. Control device: FOCA,

10 10, 2017

Can Nextion display animation directly?

By |2023-08-10T22:33:49+08:00October 10th, 2017|Categories: |0 Comments

Not directly. For Basic, Discovery or Enhanced Series models, animation can be still frame Pictures frame by frame via user code. For the Intelligent Series, use the GmovMaker tool to create animations for the Gmov component.

Go to Top