1. Overview
  2. Nextion Models
  3. Specifications
  4. Electronic Characteristics
  5. Working Environment & Reliability Parameter
  6. Interfaces Performance
  7. Memory Features
  8. Product Dimensions


Nextion is a Human Machine Interface (HMI) solution combining an onboard processor and memory touch display with Nextion Editor software for HMI GUI project development. Using the NEXTION Editor software, you can quickly develop the HMI GUI by drag-and-drop components (graphics, text, button, slider, etc.) and ASCII text-based instructions for coding how components interact at the display side. Nextion HMI display connects to peripheral MCU via TTL Serial (5V, TX, RX ,GND) to provide event notifications that peripheral MCU can act on, the peripheral MCU can easily update progress, and status back to Nextion display utilizing simple ASCII text-based instructions. Comparing with Basic Series, the Discovery Series has a better MCU performance, the same functionalities as Basic, and Lower Price. That’s Nextion Discovery Series Products.

Package include: Nextion NX4832F035 HMI Display*1, XH2.54 4P wire*1, power supply test board*1.
Note: the small power supply test board and connecting wire inside the package allow you to test if the electrical supply is enough or not. See the image below on how to use it.


Nextion Models

Nextion TypeBasic Series
Nextion ModelsNX4832F035


Color64K 65536 colors16 bit 565, 5R-6G-5B
Layout size 100.5(L)×54.94(W)×5.55(H)NX4832F035
Active Area (A.A.)73.44mm(L)×48.96mm(W)
Resolution480×320 pixelAlso can be set as 320×480
Touch typeResistive
Touches> 1 million
Backlight lifetime (Average)>30,000 Hours
Brightness300nit0% to 100%, the interval of adjustment is 1%

Electronic Characteristics

Test ConditionsMinTypicalMaxUnit
Operating Voltage4.55.06.0V
Operating CurrentVCC=+5V, Brightness is 100%120mA
Normal SLEEP Mode (lowpower=0)4.5mA
Deep SLEEP Mode (lowpower=1)0.25mA
1. Power supply recommend:5V, 500mA, DC.

2. In deep sleep mode, the wake-up time will be longer, the data will be probably lost when the serial port receive is receiving the wake-up command. Therefore, it is recommended to send a void command and delay 50ms before operating.

Working Environment & Reliability Parameter

Test ConditionsMinTypicalMaxUnit
Working Temperature5V, Humidity 60%-202570°C
Storage Temperature-302580°C
Working Humidity25°C10%60%90%RH

Interfaces Performance

Test ConditionsMinTypicalMaxUnit
Serial Port BaudrateStandard24009600115200bps
Output High VoltageIOH=-1mA3.03.2V
Output Low VoltageIOL=1mA0.10.2V
Input High Voltage2.03.35.0V
Input Low Voltage-
Serial Port Mode3.3V/5.0V TTL
Serial Port4Pin_2.54mm
USB interfaceNO
SD card socketYes (FAT32 format), support maximum 32G Micro SD Card
* microSD card socket is exclusively used to upgrade Nextion firmware /HMI design

Memory Features

Memory TypeTest ConditionsMinTypicalMaxUnit
FLASH MemoryStore fonts and images16MB
RAM MemoryStore variables3584BYTE
Instruction Buffer1024BYTE

Product Dimensions

F Series_3.5”_Nextion_Dimension

Product Certificates